Pages Menu
Categories Menu

Posted by on Oct 4, 2017 in Uncategorized

Work Safety: Tips For Everyone In The Workplace

If there is one aspect of the construction business that deserves serious concern, it will have to be work safety. And rightfully so. Safety in the workplace is best upheld through effective communication between management and people on the construction site regarding safety standards and the adherence of everyone to said standards.

This article presents some tips on workplace safety to help develop awareness of and ability to identify unsafe work site practices and opportunities for improvement.

Identify Hazardous Areas

It’s best to kick off a safety-in-the-workplace campaign by having a thorough knowledge of the hazards of your workplace. Once you’re aware of all the danger zones where you work, you’ll know where to stay away from. Be especially careful in areas where machinery is installed.

Mind Your Posture

If your work entails a lot of hip bending picking things up, always check that your form is good and that you don’t twist or stoop so you don’t end up with an aching back.

Take It Easy, Take a Break

Taking regular breaks is a good way to freshen up an otherwise burned out and exhausted worker. This ensures that concentration and focus are at their best and you’re always fit to perform the tasks that go with your job.

There’s a Right Tool for the Job

Be careful when using tools. Don’t resort to going with one tool because it’s the one that’s within your reach and the right tool for the task is out of sight. Taking shortcuts like this almost always leads to workplace injury.

Easy Access to Emergency Exits

Emergency situations call for fast movements. People scampering don’t have the luxury of time to figure things out, like which way leads to the exit. Emergency exits need to be strategically situated so as to be easily accessible during such situations. The same goes for equipment and machinery controls so that they can be quickly shut off to prevent further damage or injury.

Your Supervisor is Your Safety Ally

Be sure to call your supervisor’s attention for any safety hazards or risks in the workplace. It is a supervisor’s job to ensure employee safety and he makes this possible by helping to provide a safe working environment for everyone.

Mechanical Aids at Your Service

Human strength can only do so much. If you need to lift or carry something very heavy, take the time to make use of mechanical aids like wheelbarrows, forklifts, etc. It’s worth the extra minute reaching for these and can save you the trouble of injuring yourself doing it on your own.

Stay Sober or Be Sorry

Alcohol, drugs, and the workplace do not mix. Don’t even think about this big no-no. Many lives have been claimed in the workplace as a result of being under influence in the performance of their jobs.

Talk Away Stress

One surefire way to lose focus and concentration is to be under stress. If you’re stressed about something that’s related to work, don’t hesitate to talk this out with your supervisor. He should be happy to help you address your issues.

Safety Equipment—the Name Says It All

Safety equipment are called thus for obvious reasons. Hard hats, gloves, earmuffs, earplugs, full-face masks, goggles, etc.—however redundant they may seem—are even more important in a construction site setting for preventing workplace injury.

Of course all of the above mean nothing if foremen, facility/construction site managers, and business owners don’t exert the necessary efforts to encourage workers about the importance of work safety. It’s a total team effort, really, that makes safety in the workplace happen. Supervisors can make sharing and discussion of workplace injury and risks a part of workers’ daily schedule, or bosses can give out incentives as reward to workers showing exemplary workplace safety behavior. The simplest initiatives can go a long way.

Read More

Posted by on Jul 27, 2017 in Uncategorized

Factors To Consider Before Conducting Renovations

Home renovations requires meticulous planning. Costs can spiral out of control and contractor problems can put your home in jeopardy. Whether you are renovating to secure higher resale value or just conducting upgrades to an old house, there are factors that you should familiarize yourself with before plunging yourself into a situation that may cost you a fortune.

1. Understand your goals

If you are window shopping to know the latest trends in home improvement, let the bigger picture guide your decision. For instance, be sure to use high-end products for your home renovation if you plan on staying there for long. Premium products can make your living comfortable. On the other hand, if you want to refurbish your home just to curb on high resale value, prioritize your needs. Choose to renovate where you can recoup your investment.

2. Assess your budget

Renovating your home is a major investment and you want to go in with clear budget lines. And as such, discuss with your potential contractor or builder and obtain an estimate of all the costs. Having a clear cost estimate can guide you in securing financing. However, financing can burden you on mortgage payments so you want to gauge all you options. Ensure that the cost of renovating your home is as cost-effective as possible.

3. DIY vs. Contractor

Since revamping your home is quite expensive, you may choose to take it as a DIY project. While you may be able to paint, install tiles, and doing a host of tasks, major projects may need professional builders. DIY projects however need some guidance. Talk to your local builder for ideas and guidance in understanding local rules and regulations. An expert can also inform you of ideas that are possible and the ones that cannot be achieved with specific home designs.

4. Safety

Refurbishing your home may involve removing hazardous materials found in flooring, roofs and ceiling material. When dealing with materials containing asbestos, you want to be extremely careful. Asbestos is a potentially dangerous materials that can cause respiratory poisoning. If revamping your home involves asbestos removal, be sure that professionals handle this hazardous material and dispose it in a proper manner.

5. Timing

Hiring a reputable and experienced contractor is important. The time taken to complete a project will rely on how well conversant a builder is with the associated work. For this reason, you want a contractor who will specify project start and completion time. You do not want to stay out in the cold for too long.

It is imperative that you review the above factors including many more to determine if you can conduct home renovations.

Read More

Posted by on Apr 5, 2015 in Homes

Energy Efficiency

energy-efficient-homesIn the 1950s and 1960s, people could only imagine what homes would look like fifty to sixty years from then in the future. Perhaps you could talk to your home, or the kitchen could cook for you, or the homes would be made out of futuristic looking materials.

While homes may not quite be that fancy to the average home owner, the homes of today are still certainly more advanced than the homes of a few decades ago.  Floor plans have become more open, the bedrooms and kitchens have become more spacious, and there are more outlets to plug in devices to watch or listen to media.  But one trend that is often overlooked is the energy efficiency of homes especially in regards to heating houses in colder climates like Churchill Manitoba which can be very expensive over the seasons.  That’s what we’re going to look at next.

Energy Efficiency


  • You’d be surprised to learn how new homeowners on the market are consistently asking for energy efficient homes. One such example is an efficient laundry room that is located on the main floor.  Another example is having a more open kitchen.  No longer are kitchens being limited to a small room with only one entry point.  Instead, many of the cabinets and counters in kitchens are ‘islands’ in a larger floor space, and there are significantly more entry points leading into the kitchen as well.  In addition, the kitchen appliances themselves are significantly more energy efficient and use up less energy.


  • Previously, having energy efficient or ‘green’ homes was seen as a fancy edition to homes. Now, it’s being increasingly seen as the norm.  It’s now gotten to the point where energy efficiency is one of the top qualities new homeowners look for in homes on the market.  Programmable thermostats, energy efficient appliance, and energy star rated windows are just a handful of examples that people look for in homes.


Why Go Energy Efficient?


  • Are people looking for energy efficient homes just because they care about the environment. Some homeowners are that way no doubt, but for most people, it’s because the utility expenses in energy efficient homes are cheaper.  When you market homes that are more affordable to maintain to people, their interest in those homes skyrockets dramatically.
Read More

Posted by on Apr 3, 2015 in Floors, Homes, Renovations

Flooring Trends Part 2

Here are some more flooring trends that have gained a foothold in the housing market in 2013 and 2014 and will continue on into 2015:



wood flooring


  • Wooden floors are still popular in homes, particularly in kitchens. These are not to be confused with the tiled floors that look like wood.  The most popular kinds of wood floors out right now are laminated wood, which is significantly less expensive than hardwood, and many would say actually looks better.  For those homes that do use hardwood, homeowners and builders are drifting over to dark stains and tones, such as walnut or cherry.  In addition, while the floors are all perfectly new, homeowners are preferring that the wooden floors look old and mid century.


  • Another type of wood that has really taken off is bamboo wood. Bamboo is becoming popular because it comes from a renewable resource, and many of the cons previously associated with it have since been remedied, such as shrinkage issues.  Bamboo is also popular as it comes in a variety of different colors.



vinyl flooring contractor


  • Luxury vinyl may not be near as popular in homes as carpet or wood is, but it is making headway on its own. To make the luxury vinyl more affordable that we see today, the color and look of wood can be printed into squares.  In other words, you can practically take a picture of anything and then turn it into a vinyl tile, and it can be placed into any room.  Most vinyl flooring is found in the bathrooms of homes.



tile flooring


  • Finally, tile is also becoming a more prominent part in the housing world. Notably, the actual tiles themselves are becoming larger than the typical foot by foot long tiles that older houses have.  It’s not uncommon for ceramic tiles today to have dimensions of one foot by two feet.  Many of the digital prints that are used on vinyl tile are also used on ceramic tiles, which can give tiles either a marble, concrete, or a hardwood look and feel.


Read More

Posted by on Mar 25, 2015 in Floors, Homes, Renovations

Flooring Trends

What is the fastest growing part of the housing industry?  It may depend on who you ask, but many would say it’s the flooring industry.  Since there are so many new materials and options available for homeowners today, there are an abundance of new flooring trends.  For example, many housing amenities that were previously only found in upper class homes have found their way into lower cost and more middle class homes as well.  We’ll take a look at just a handful of the flooring trends that have developed over the last couple of years:




carpet flooring contractor


  • The new carpets in homes are both softer than before and friendlier to the environment. This is because the carpets of today are being made with different combinations of fibers.  They can do this by taking old polyester and melting it down to make new fibers.  This makes the fiber significantly more soft and eco-friendly.  Previously, these kinds of carpets were only known as luxury carpets and were mainly installed in upper class homes.


  • Many of those in the housing industry have been surprised by the emergence of luxury carpets into middle class homes. The main reason for this is because luxury carpet is well known for how soft it is; many homeowners and builders after the Great Recession has simply decided that the softness of the carpet is well worth the extra cost.


  • For the actual style of the carpet, people prefer a patterned carpet with a clean finish that fits in well with the design of the hope. Some carpets are also cut and then pieced together like a puzzle to create more unique patterns, and significantly adding on to the personality of a home.


  • Do all areas of floors in homes use luxury carpets? Usually not.  Typically, in the modern homes we’ve been seeing over the last couple of years and into 2015, the luxury carpets are located primarily in the bedrooms and on the stairs, no doubt because these are two places where homeowners do a lot of walking.


Read More